12 Companies Setting The Standard In Double Glazing Lock Repairs
12 Companies Setting The Standard In Double Glazing Lock Repairs
Blog Article
Double Glazing Lock Repairs
A good quality lock on your windows and doors will stop burglars from gaining access to your home. They usually don't want breaking glass or trying to squeeze through open windows.
Certain double glazing owners however, have experienced problems with their window or door lock after the installation. Luckily, these problems are usually fixable and don't require to pay for new double glazing.
Broken or damaged locks
A locksmith can fix your uPVC window or door lock if it's damaged or broken. They can fix hinges, striker plates and locks for double-glazing. They can also reposition the cylinder in order to fix any misalignment that could be causing your handle to work properly.
If the key fits into the lock but doesn't turn or is difficult to insert, the mechanism might be locked up. The dirt or grease could get stuck in the mechanism. If this is the case, it is possible to clean the lock and lubricate it. Use a dry lubricant like graphite or teflon and not oil, as oil can attract dirt and cause it to stick to the mechanism's inside. After lubricating, insert the key into the lock and turn it. The lubricant will work its way through the mechanism and the lock should be able turn easily.
A faulty lock can also be caused by loose screws within the lock mechanism. They may loosen and fall out or even break completely preventing the lock to perform as it should. The screws can be tightened with a screwdriver, but be careful not to over tighten them. This could cause damage to the internal components.
A broken lock can be hazardous for you and your family. This is particularly the case if you have children. It is possible for them to unlock the door without knowing, and this can give them access to your home. If you're worried about this happening, then a vetted locksmith can provide fast and efficient assistance to secure your double glazing doors.
Misty Glaze are a professional uPVC and double glazing company based in Lancing that can fix all kinds of damaged and broken mechanisms such as handles, cylinders, handles and lock systems for both uPVC windows and doors. We can also reconfigure your uPVC or double glazing locking system to meet your particular needs, which means that in many cases replacement windows and doors are not required.
Handles that are broken or faulty
Many double glazed windows feature the multi-point lock as part of the overall security package. This is an excellent option for those who are worried about potential burglars trying to gain access to their home. It's also worth asking your locksmith about anti-lift blocks, these can be fitted on top of the locks that are already in place to ensure that your window is locked in the closed position.
It's not uncommon for the handle locks to get damaged or even fail - they are the first component of your window that will be pushed open by criminals intent on breaking into. Fortunately, the good news is that this is one of the easiest parts to repair.
Modern uPVC handles and aluminum handles come with the multi-point locking mechanism referred to as Espagnolette that is designed to ward off forced entry. This upgrade to security is typically offered as an optional extra on new uPVC window installation. Older style uPVC and aluminum handles can be upgraded to lock systems that shoot bolts, again as an optional option on double-glazed windows.
It is crucial to fix the handle as soon as possible after it has been damaged. A damaged handle can stop the window from closing correctly and allow drafts in. It can also be a flaw that thieves who are opportunistic could take advantage of, putting your family's belongings and your own at risk.
To repair the click here damaged mechanism, first gain access to the window frame, then take off the damaged handle. The gearbox that opens the handle is then located and the model is identified, so that a replacement may be sourced which matches the profile of the internal window frame mechanisms.
After the mechanism has been repaired the handle can be put back together using the original screws. However, we recommend replacing them with more long screws to ensure a more secure fit. The final stage is to apply a coating of clear sealant in double glazing repairs near me order to protect the handle from further corrosion. After you've completed this step the window should be fully functional again at a fraction the cost of replacing it.
Hinges that are broken or damaged
If your windows don't close properly, you may experience draughts, the weakening of your home's security barrier and a higher risk of water or damp damage. Broken or damaged window hinges are a typical problem that can be fixed easily.
If your uPVC windows won't open or shut and close, it's likely the hinges require to be replaced or repaired. Many window companies will require that you purchase an entirely new window unit in order to fix this simple issue, but we can replace the hinges in order to save you money.
Window hinges may break due to repeated use or may be weakened due to corrosion over time. If you've broken a window hinge, it's crucial to take the necessary precautions to prevent further damage. This means not causing the window to close or open.
You can locate the appropriate parts for your hinge by identifying its type. Maco, Mila and Roto are all manufacturers of window hinges. Consult a professional to avoid buying parts that do not work with your existing hardware. This can result in further damage.
The hinges that are not working properly can be a huge problem for uPVC windows and doors. They can be a significant source of noise, and they can also allow for water infiltration which could damage your windows.
To fix this issue, first check that the pin barrel on both sides of the hinge is aligned. If not, tap the head pin with the hammer to create a shallow bend in the hinge barrel. This will help keep the pin in position. Ask a second person to hold the door while you remove the hinge screws and hinges from both the doorjamb as well as the door. Replace the hinges and install screws with glue. Finally fix the hinges using clamps or weights until the glue sets.
Once the hinges have been fixed and repaired, you should be able to install the door and re-attach the handle. It is recommended to replace the screws with the same length of dowels as the original screw, so that they are in line with each other.
Broken or faulty glass
uPVC Windows can be damaged over time, even though they are excellent at keeping cold out and keeping the heat. This can be the case with broken or damaged glass as well as faulty locks. This is an issue that could be extremely costly when neglected. It can also affect the aesthetics of your home and lead to a loss in insulation. It is crucial to repair any damage immediately.
You can fix your cracked glass by yourself if your have the appropriate tools and techniques. Be sure that the area around the broken glass is clear of debris to ensure that fragments don't cause injury or trip hazards. Next, remove any pieces of broken glass and dispose of them appropriately. Apply masking tape over the entire area. This will stop glass fragments from sticking to your skin and scattering when you move them. If you're dealing with a double-paned window, it's a good idea to pre-fit the pane of glass before gluing it back into place to double glazed windows near me ensure that you'll have enough space finish the project.
Before applying the glue clean the surface of the broken frame and the glass with a dry, clean cloth. Follow the instructions for application and curing time which may differ from one product to the next. You may need to clamp the broken glass with clamps made of lightweight materials designed to hold delicate materials, based double glazed near me on the angle.
After the adhesive has fully cured, carefully reinstall the glass inside the window frame, ensuring it's flush with the edge of the frame, and there are no more info gaps between the glass and the window sash. Be careful not to bend the window when it's being put back in place, as this can weaken the seal and cause water infiltration and condensation.
If you have a glass window that is completely shattered or has larger cracks, call an experienced professional glazier such as O'Brien(r) to organise an exchange. It's crucial to act fast when you notice broken glass.